TSI SOLIUM 3020 SERIES

Description

The Solium 3020 Series :

Solium offers functional and subtle elegance with simple and cute lines. A box type common frame allows for the concealing Sliding system within two paneled box structure.  A slim chair profile permits the architect to increase capacity without sacrificing comfort or proper egress space. The Solium is available with fully-upholstered seats and backs or with an optional Plastic Covers. Removable fabric covers are standard for easier maintenance. It is available in Floor Mount, Wall Mount, Air Diffusor Mount, and even Adjustable Air Diffusor Mount version.

The following models are available:

Solium C1 Features :  A Foldable Pushback Auditorium Chair with Fully-upholstered seat and back cushions for an elegant and warm appearance. Fabric slip-on covers are equipped with a zipper for easier on-site replacement. This chair Also Consists of the Synchronized Push Back System along with the Seat tip-up Feature.

Solium C4 Features: A Foldable Pushback Auditorium Chair with Fully-upholstered seat Assembly and Plastic covered back cushions assembly for economic and vandal-proof performance. This chair Also Consists of the Synchronized Push Back System along with the Seat tip-up Feature.

Solium D4 Features: A Foldable Pushback Auditorium Chair with Plastic covered Seat and back cushions assembly for an elegant and warm appearance. This chair Also Consists of the Synchronized Push Back System along with the Seat tip-up Feature.

• Tested and Proven Torsion Spring-based seat auto tip-up mechanism
• Durable Synchronized Seat forward Slide and Back recline System (Synchronized Pushback System)
• Hardwood armrests, PPCP cup holder armrest or PU skin Integral Armrest are available
• Durable powder-coat finish is standard on all steel components.
• Flush mounted floor attachment hardware is standard.
• Removable, zippered seat and back covers are standard and allow for easier on-site replacement.
• Standard spacing is 22″, and 23″ c.c. of frames
• High-pressure Poly Urethane moulded cushions for seat and back of 50+/5 Density
• 3 Warranty is the standard warranty against manufacturing defects and 17 Years Warranty Extention Can be purchased on paid bases.

Solium 3020 Product Advantages

Tip-Up Seat The Solium seat tip-up action is attained by the use of a tested and proven Torsion Spring mechanism

Seat Construction The Solium seat construction is patterned after office chairs for long-term comfort and durability. Flexible polyurethane foam is glued directly to the structure of the seat. The advantages of this type of construction are as follows:

Silence, durability, comfort. Seats constructed with serpentine springs often fatigue, sag and fail. This creates an uncomfortable and noisy seat, which may require replacement. TSI’s flexible polyurethane foam construction offers significant user comfort over long seating periods. Additionally, the absence of steel springs insures completely silent compression during use.

Upholstered options. Unlike metal seat pans with serpentine springs, Solium’s all-wood construction allows for custom upholstery detailing. The fully-upholstered seat has a zippered slip-on fabric cover for easier on-site replacement.

TSI Chair Frames The Solium frames are welded assemblies of heavy gauge and solid steel components. The advantages of this type of construction are listed below:

Flexibility. The Solium’s welded steel assembly allows for simple and cost-efficient design modifications for conformance to unique building conditions. Unlike high volume castings, welded construction facilitates small production run modifications.

Cost of Ownership Due to the obvious product advantages of Solium seating as mentioned above, and the superior service and warranty levels offered by TSI, purchasing Solium seating is a better long-term value. The initial savings associated with the purchase of a less expensive chair is likely to be lost through ongoing maintenance and replacement during the lifetime of the product.

Consistent and automatic return to the upright position. Spring mechanisms can have inconsistent tip-up action due to the variation of the strength or fatigue of the steel springs. This affects the aesthetics of the room and may affect compliance with egress codes since the seats may not return to a consistent upright position.

Silent action. Spring mechanisms are likely to develop squeaks and normally produce several loud hits before coming to a stop.

Seat tip-up will never fail. Because the Acclaim mechanism relies on gravity, it will never fail to return the seat to its upright position. In contrast, as a spring mechanism fatigues, the seat tip-up action will get slower. Eventually, the spring mechanism may fail to return the seat to the upright position, producing a possible violation of egress codes.

Seat Construction The Acclaim seat construction is patterned after office chairs for long-term comfort and durability. Flexible polyurethane foam is glued directly to the structure of the seat. The advantages of this type of construction are as follows:

Silence, durability, comfort. Seats constructed with serpentine springs often fatigue, sag and fail. This creates an uncomfortable and noisy seat, which may require replacement. TSI’s flexible polyurethane foam construction offers significant user comfort over long seating periods. Additionally, the absence of steel springs insures completely silent compression during use.

Upholstered options. Unlike metal seat pans with serpentine springs, Acclaim’s all-wood construction allows for custom upholstery detailing. The fully-upholstered seat has a zippered slip-on fabric cover for easier on-site replacement.

TSI Chair Frames The Acclaim frames are welded assemblies of heavy gauge and solid steel components. The advantages of this type of construction are listed below:

Flexibility. The Acclaim’s welded steel assembly allows for simple and cost-efficient design modifications for conformance to unique building conditions. Unlike high volume castings, welded construction facilitates small production run modifications.

Cost of Ownership Due to the obvious product advantages of Acclaim seating as mentioned above, and the superior service and warranty levels offered by TSI, purchasing Acclaim seating is a better long-term value. The initial savings associated with the purchase of a less expensive chair is likely to be lost through ongoing maintenance and replacement during the lifetime of the product.

Solium 3020 Product Advantages:

Solium offers a functional and subtle elegance with simple and cute lines. A box type common frame allows for concealing Sliding system within two paneled box structure.  A slim chair profile permits the architect to increase capacity without sacrificing comfort or proper egress space. The Solium is available with fully-upholstered seats and backs or with an optional Plastic Covers. Removable fabric covers are standard for easier maintenance. It is available in Floor Mount, Wall Mount, Air Diffusor Mount, and even Adjustable Air Diffusor Mount version.

The following models are available:

Solium C1 Features :  A Foldable Pushback Auditorium Chair with Fully-upholstered seat and back cushions for an elegant and warm appearance. Fabric slip-on covers are equipped with a zipper for easier on-site replacement. This chair Also Consists of the Synchronized Push Back System along with the Seat tip-up Feature.

Solium C4 Features: A Foldable Pushback Auditorium Chair with Fully-upholstered seat Assembly and Plastic covered back cushions assembly for economic and vandal-proof performance. This chair Also Consists of the Synchronized Push Back System along with the Seat tip-up Feature.

Solium D4 Features: A Foldable Pushback Auditorium Chair with Plastic covered Seat and back cushions assembly for an elegant and warm appearance. This chair Also Consists of the Synchronized Push Back System along with the Seat tip-up Feature.

Solium 3020 Product Advantages:

The Solium chair is available with many options. Choose the options that are appropriate for the project.

End Panels Available as either upholstered or veneer, end panels can enhance the visual appeal of the room. They can be upholstered to match the chairs, or stained to match the armrests.

Aisle Lights Low-voltage (24v) aisle lights discreetly illuminate dark aisles and steps, enhancing safety and visual appeal. Aisle lights can be concealed in the underside of the arm cap, or installed in the end panel. Wiring is routed through the frame to provide a clean installation.

Seat & Row Identification and Donor Tags Seat & row identification plates and donor tags are available in a variety of shapes and finishes.

Tablet Arms The tablet arm folds between the seat and armrest and provides a work area for the occupant. Tablet arms are available as either left or right-handed.

California Technical Bulletin 133 Fire Code Compliance (when required by local codes)

Removable Chairs Available as one, two, or three chairs, these units include a steel sled-base and can conform to the row radii so as to provide harmony with the design of the room, while maintaining the utmost in flexibility. Removable chairs are available with a standard base that allows them to be bolted to the floor quickly and easily, or an extended base that allows them to be completely freestanding without the need for physical attachment to the floor.

Wood Veneer Back Available in a variety of wood veneers, the outer back panel is ideal for use on chairs which require superior acoustical quality or extra protection.

Laminate Back Outer Back panels are available with a high-pressure laminate face; ideal for use on chairs which require superior acoustical quality or extra protection.

Plastic Back Outer Plastic Cover are available, ideal for use on chairs which require vandal protection.

Transfer Arms Designed to comply with the Americans with Disabilities Act, these unique frames allow easy and clear access to the seat. Installations without an end panel feature a hinged lift-up armrest while installations with end panels feature removable end panels.

Oversize Chair Widths Chair widths of 23” and 24” c.c. are available to provide occupants with a higher level of comfort and to satisfy layout requirements.

Bookracks Available to meet the specific requirements for book storage, TSI provides project-specific solutions.

Power/Data Popular with corporate training and educational facilities, the power/data ready frames option allows for distribution of networked communications and 120/230 volt power directly to each chair, allowing laptops to be connected to the building’s internal computer and power distribution networks.

Solium 3020 Product Advantages:

(Note: See Exploded Assembly [Figure 4] and Floor Mounting Details [Figure 5] on following pages.)

1. Use the approved floor plan to establish hole locations for the footplates. Note that the chair radius line is 1-1/2” behind the front hole of the foot plate. Accurate center-to-center width spacing is critical to a proper installation. Tolerance on the chair width dimension is plus or minus 1/8″. It is critical not to exceed this tolerance on width spacing.

2. When mounting chairs over carpet, punch two 5/8″ diameter holes in carpet to match holes in the chair base plate. (See figure 4.) Bolt leg frames to floor as per the appropriate anchoring method. Use 1/4″ flat head machine bolt or wood screws and countersink lock washers. Hand-tighten bolts to allow for some slight movement in the leg frame. (See figure 4.)

3. Attach back as follows: From the front of the legs, slip the back panel over the legs with the top brackets sliding over the top of the frame and the bottom brackets sliding under the frame. Installing the back panel from the front of the legs insures that the back brackets on the upholstered back do not scratch the paint on the rear of the legs. Align slots in the back brackets with the threaded holes in the leg (4 locations for each back) and insert a 1/4-20 x 1/2” SEMS machine screw. Center the back panel between the legs, hand tighten all screws first, then tighten securely.

4. Attach the seat as follows: a. Attach one hinge to the seat with two 1/4-20 x 1-1/4” fillister head machine screws. Make sure that the “L” part of the hinge is over the side edge of the seat and the rubber bumper on the hinge is toward the front edge of the seat. Hand-tighten the screws.

b. Place a nylon washer over each forward pivot pin followed by a plastic bushing.

c. Slide the seat (with attached hinge) onto forward pivot pin on the leg.

d. Place the nylon washer, plastic bushing, and hinge onto the opposite forward pivot pin and pull seat to hinge (“L” part of hinge is over the side edge of the seat and the rubber bumper on the hinge is toward the front part of the seat). Insert two 1/4-20 x 1-1/4” fillister head screws and hand-tighten.

e. The seat hinges should be adjusted tight against the shoulder of the pivot pin and should be parallel to the leg tube. The seat should be centered on the hinges. Securely tighten all four screws.

5. Flip seat up and down several times to insure that it pivots and returns to upright position freely. Adjust hinges as necessary. If side-to-side play exists in the seat, readjust hinges moving them outward toward the legs, or if hinges have been adjusted to their maximum, add additional nylon washers. It is critical to insure full engagement of the hinge onto the hinge pin.

6. Attach armrest with #8 x 3/4” sheet metal screws; two per arm without tablet arm, three per arm with tablet arm. Left and right aisle arms have partial cut out slots to allow clearance for a single back bracket. Center arms have thru slots to allow clearance for two back brackets. Center the armrest on the leg and tighten securely.

7. Tighten all floor attachments securely.

Maintenance Instructions

The Solium 3020 chairs are designed and built for years of reliable service. The durability and beauty of the chair will however, be greatly enhanced with proper care and inspection, as described below. Each project will be provided with an Operations and Maintenance (O&M) Manual which will describe in detail the maintenance measures to be taken by onsite personnel. For more information on the care of the veneer and fabric components of your product, please refer to the Finishes section of the Theatre Solutions binder.

Preventative Maintenance

Inspection and Cleaning

In the first year after the original installation, it is recommended that the chairs be inspected quarterly to insure that all chairs remain secure to the floor, and that the seats and backs remain tight to the leg frames. After the first year, this inspection interval can become longer, but should never exceed 6 months.

Lubrication

There are no components in the Solium chair which require lubrication. Seat pivot hinges include a nylon bushing to insure silent and consistent performance.

Periodic Readjustment

Besides inspecting for loose screw attachments, there should not be any routine need for readjustment. If, however, a loose connection is discovered, please refer to the appropriate drawing and instructions for installing the subject component. These drawings and instructions can be found in the O&M Manual.

Corrective Maintenance

The Solium chair has been designed and tested to achieve optimum performance and durability. In general, onsite maintenance personnel can provide the appropriate service to correct problems if they have the necessary spare parts and installation instructions.

Troubleshooting

In the event that a problem with the performance or finish of the chair occurs, it is often possible for immediate on-site remedies. TSI recommends that any loose component should be inspected for any visible evidence of breakage. If evidence is found, the part should be immediately replaced. If there is no evidence of breakage, the attachment hardware should be checked to insure tightness.

Obtaining Replacement Parts

A complete list of spare parts provided with the original installation is included in the O&M Manual. If any additional parts are required, simply contact Theatre Solutions and refer to the appropriate part number or the description listed in a drawing depicting the component.

Service Calls

For service work which cannot be executed by building user, contact Theatre Solutions and we will assist in arranging for a visit by qualified technicians.

Shipping Back to Theatre Solutions

Prior to returning any component part(s) to Theatre Solutions, please contact us by phone or fax for instructions on packaging and shipment method.

tsi_teatro_brochure.pdf

tsi_teatro_a1_specifications.pdf

General Inquiries

There are no inquiries yet.